Instrument panel lower Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the...
Support engine. Pull coolant overflow tank out and move to the side. Warning! Be prepared to collect escaping fluid. Remove x2 screws from engine pad to frame member Torque: 90 Nm Remove...
1. Support the vehicle and remove right front wheel. 2. Remove engine undertray. 3. Relax tension on belt and remove belt. To install, reverse the removal...
When changing the rear brake pads on a Volvo P1 chassis model (S40, V50, C30, C70 II), you can't just push the piston back into the caliper to make room for the new pads. The pistons on these...
My Volvo V50 2.4i recently threw a couple of VVT related error codes: ECM-640A and ECM-640F and one of the suggestions in VIDA is to clean or replace the inlet camshaft check valve (VVT valve)....
Putting together a list of Volvo P1 parts (S40/V50/C30/C70) and their Ford and Mazda equivalents. Volvo Part Part No. Ford P/N Mazda P/N Coolant tank (2.4i) 30776151 1438913 /...
